Bitmain AntMiner S7 LN – NO POWER SUPPLY – Limited Batch 1 Units Available!
Bitmain AntMiner S7 LN has VERY STRICT MFG PSU / Power Supply and Warranty Guidelines! Contact Me with any Questions! All Sales Final – No Refunds!
IN HAND / IN STOCK Units!! Fast Same Day Shipment up until 2 PM EST from East Coast or West Coast Warehouses!!
Instock units are bench tested to ensure not DOA! These are instock in U.S. and NOT Drop Shipped from China!!
Bitmain AntMiner S7 LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.Miner ONLY! – NO PSU Included (Sold Seperately)
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU NOT Included – Power Supply Atleast 900 Watts SOLD SEPERATELY
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the “一”.If the power is still off ,please also press the Antminer-switch to the”一”.Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
Bitmain AntMiner S7 LN Limited Availability! Batch 1 Unit! ABSOLUTELY NO RETURNS! No Refunds! All Sales Final!
Tested Working Before Shipment! DOA Units will need to be covered by Carrier Insurance, or NO Warranty! SOLD AS-IS! No Returns / No Refunds / All Sales Final!